FlexCAD

FlexCAD is an add-in software for AutoCAD and Inventor, designed to enhance designing FlexLink conveyors and structural system and provide a Bill of Material in the respective software's to facilitate a seamless interface to the Online Store. Where to find FlexCAD: Customers; FlexCAD for AutoCAD is located in My FlexLink Download Area You'll find MyFlexlink here http://my.flexlink.com For FlexLink internal users, when installing AutoCAD or Inventor from Software Center, FlexCAD is installed at the same time.

Edit beam length in FlexCAD AutoCAD
Applies to FlexCAD. This instruction is valid for all FlexCAD AutoCAD beams except the conveyor beams of the platforms X85X, X180X, X300X, WL374X, WL526X a...
Fri, 9 Oct, 2020 at 8:22 AM
Default project
Applies to FlexCAD. Version 1.0.6964.26312 (and newer) of FlexCAD is prepared for Amber. To use Amber properly it is required to set the active project in ...
Fri, 9 Oct, 2020 at 8:23 AM
Create a Guide Rail Symbol
Applies to FlexCAD. This article is not on how to design a guide rail symbol, it's on how FlexCAD AutoCAD works with guide rail symbols. A Guid...
Fri, 9 Oct, 2020 at 8:27 AM
Edit a User Symbol
Applies to FlexCAD.   In this article it is shown to physically edit a user symbol, how to edit the fasteners is shown at the end of the article How to ad...
Fri, 9 Oct, 2020 at 8:29 AM
Copy a User Symbol
Applies to FlexCAD.   Copying an existing user symbol to produce a new user symbol is very easy. Click the User Symbols icon and the User symbols window o...
Fri, 9 Oct, 2020 at 8:32 AM
Add fasteners to a User Symbol
Applies to FlexCAD.   There is a function within the User Symbols function to quickly add fasteners, so the users do not have to find them in the browser ...
Fri, 9 Oct, 2020 at 8:34 AM
Create a User Symbol
Applies to FlexCAD.   In FlexCAD AutoCAD there is a library function to enable reuse of assemblies that occur more than once in a drawing and in more than...
Fri, 9 Oct, 2020 at 8:36 AM
Adding the Part list
Applies to FlexCAD.   The Part list in FlexCAD AutoCAD can be manipulated with the Part list function regarding the order of the components and numbering....
Fri, 9 Oct, 2020 at 8:39 AM
Calculate chain needed in FlexCAD AutoCAD
Applies to FlexCAD.   Since chains, slide rails and rivets are cumbersome to draw and incorporate in a drawing with the correct amount and length, there i...
Fri, 9 Oct, 2020 at 8:41 AM
Export Part list from FlexCAD AutoCAD
Applies to FlexCAD.   Exporting the part list (or Bill of material) from FlexCAD AutoCAD is supported in two formats, .xls (Excel) and .cvs (Comma Separat...
Fri, 9 Oct, 2020 at 8:43 AM