FLCT
The Chain calculation tool (FLCT) is a client based tool used to perform advanced chain tension calculations on FlexLink based conveyors. The tool can be downloaded for free from MyFlexlink/Download area.
Applies to FlexLink Chain Calculation Tool. The WLX end drive unit J is a combined end drive unit and idler end unit. A fixed connection makes it possible ...
Thu, 8 Oct, 2020 at 2:15 PM
Applies to FlexLink Chain Calculation Tool. Here's a list of shortcut key combinations in the Calculation Tool. Key combination Description CTR...
Thu, 8 Oct, 2020 at 2:19 PM
Applies to FlexLink Chain Calculation Tool. When selecting a component in the layout list the corresponding component in the 3D view will be highlighted in...
Thu, 8 Oct, 2020 at 2:21 PM
Applies to FlexLink Chain Calculation Tool. Free-texts comments can be attached to each layout. From the file menu select Comments After you have en...
Thu, 8 Oct, 2020 at 2:23 PM
Applies to FlexLink Chain Calculation Tool. To create an alpine in FLCT is a repetitive and time-consuming procedure if created manually and it will qui...
Thu, 8 Oct, 2020 at 2:23 PM
Applies to FlexLink Chain Calculation Tool. An existing layout can be converted from the current platform to another by simply selecting the new platfor...
Thu, 8 Oct, 2020 at 2:24 PM
Applies to FlexLink Chain Calculation Tool. Component properties like length, radius, angle etc can be changed after dropped into the layout. The rule ...
Thu, 8 Oct, 2020 at 2:25 PM
Applies to FlexLink Chain Calculation Tool. There are three types of X-bend components that you can use in FlexLink Calculation Tool: Return chain, Top ...
Wed, 1 Sep, 2021 at 1:36 PM
Applies to FlexLink Chain Calculation Tool. Choose platform from the drop-down list in the conveyor Setting area. If the selected platform permit you t...
Thu, 8 Oct, 2020 at 2:28 PM
The Chain calculation tool (FLCT) is a client based tool used to perform advanced chain tension calculations on FlexLink based conveyors. The tool can be d...
Thu, 8 Oct, 2020 at 2:51 PM