Design Tool: Enclosures

Design Tool Enclosures: Tutorial 1
Applies to FlexLink Design Tool. This training consists of eight tutorials and one exercise. Look at the tutorials in the correct order and do the exercise...
Wed, 30 Sep, 2020 at 10:57 AM
Design Tool Enclosures: Tutorial 2
Applies to FlexLink Design Tool. Tutorial 2 - Connectors & Accessories In this section, we will show you how to place connectors and add accessories i...
Wed, 30 Sep, 2020 at 10:57 AM
Design Tool Enclosures: Tutorial 3
Applies to FlexLink Design Tool. Tutorial 3 - Door & Panels In this section, we will show you how to build a door and work with panels.
Wed, 30 Sep, 2020 at 10:58 AM
Design Tool Enclosures: Tutorial 4
Applies to FlexLink Design Tool. Tutorial 4 - Feet & End cap In this section, we will show you how to use the feet and end cap tools.
Wed, 30 Sep, 2020 at 10:58 AM
Design Tool Enclosures: Tutorial 5
Applies to FlexLink Design Tool. Tutorial 5 - Machining In this section, we will show you how to add machining to beams, remove it and visualize it.
Wed, 30 Sep, 2020 at 10:59 AM
Design Tool Enclosures: Tutorial 6
Applies to FlexLink Design Tool. Tutorial 6 - Scale In this section, we will show you how to scale an enclosure.
Wed, 30 Sep, 2020 at 11:00 AM
Design Tool Enclosures: Tutorial 7
Applies to FlexLink Design Tool. Tutorial 7 - Custom supports In this section, we will show you how to build a custom support, using enclosures.
Wed, 30 Sep, 2020 at 11:42 AM
Design Tool Enclosures: Tutorial 8 + Exercise
Applies to FlexLink Design Tool. Tutorial 8 - Building an enclosure In this section, we will use the knowledge from previous tutorials and build an enclos...
Wed, 30 Sep, 2020 at 11:43 AM