Applies to FlexLink Design Tool.
In this tutorial we will show how to get robots and resources moving. There are two different libraries that can help you with that. One is the machine tending library which is easy to use but comes with some limitations. And the works library which is a little bit more difficult to use but is more flexible.
This tutorial will focus on the machine tending library.
Part 1- How to pick and place, from conveyor to conveyor Time stamp 00.26
Part 2- How to add a machine to the flow Time stamp 06.04
Part 3- Replacing the robot with an operator Time stamp 09.54
Part 4- Using the library for palletizing Time stamp 12.37